Fighting to get a good wifi connection at home is a common problem. You might find that your wifi speed is rather low, or you can’t connect at all when you are too far from your wireless router. What can you do to achieve better performance? Here are four suggestions.
1. Buy a Better Router
Most people use routers given to them by their internet service providers (ISP). For many people, this is adequate, depending on the size of your home and the device you use online. No need to say, however, that any router provided as part of your contract with your ISP will be a rather basic model.
Like most things in life, you get what you pay. In general, the more you spend on your wireless router the better the quality of the device, and the stronger the WiFi signal transmitted by the router. I once had a client who saw a wifi download speed of fewer than 20 Mbps with a router provided by the ISP. He spent several hundred dollars for a high-quality WiFi router and then reached a speed in the range of 80-100 Mbps, which was comparable to what he saw with an Ethernet cable connection.
In shopping for a better router, make sure you do research in terms of the reach you need in your home. This means you have to measure the distance from the position of your router to the farthest reach of your home and make sure you buy a device that is able to transmit this distance. You also need to take into account how many walls that might block the path of your router to the desired location in your home.
2. Use a WiFi Range Extender
Using WiFi Extender may be the lowest cost and the most common solution used by most people in an effort to increase their home wifi. The extension of this range or booster functions only by taking the existing wifi signal and transmitting it with greater strength. You can then connect one of the original or new wifi networks made by the extender. Or, if the booster is configured properly, your wireless device will automatically use any of the strongest Situs Judi Slot Online Jackpot Terbesar signals, assuming they have the same network name (SSID).
3. Add a Second Router
Sometimes the problem with your internet installation at home is that the wifi router is located in a location that does not match your home and cannot be physically moved. For example, your connection to the outside world can be located in your garage, through telephone sockets or optical fibre installation. Because the equipment provided by your ISP needs to be connected there, you end up with a wifi signal that transmits from a location that may not have an adequate range for your home.
By adding a second wireless router to a more central location in your home, you can create additional WiFi networks that are far more likely to serve your needs. If you live in a newly built house that has been equipped with an Ethernet connection port to various rooms, this is much easier to achieve. All you need to do is connect situs judi slot terbaik dan terpercaya no 1 your additional router to one of the Ethernet ports and ensure that the original router is connected to the port for a particular room.
If you don’t have the luxury of the house that has been collected in this way, you can use a powerline kit to achieve the same results. This kit contains two adapters plugged into your standard electricity socket. The first is plugged around your original router and then connected to one of the LAN ports on the router using an Ethernet cable. The second is plugged into the room where you find your second wifi router. Then connect to the second router through Ethernet in the same way as if you have an Ethernet socket on the wall.
When connecting your new router to the Ethernet wall socket or powerline adapter, you can connect either using a LAN or Port Wan. If you are connected to the LAN port, you only expand the original network and you have to make sure the IP gateway Slot Gacor address of the second router is in the same range used by the first router, and DHCP is deactivated. If you connect to Port Wan, you effectively create a second subnetwork in your home and you must make sure the IP gateway address is not in the range used by the first router, and DHCP is activated.
Whether you are connected to LAN or WAN port, you also have to configure your additional WiFi network name, along with its safety settings. This must be a different name from those used by the original router. You can also choose to disable the transmission of wifi from the original router so you have a wifi network in your home.
4. Use a Mesh Router
A Mesh Router is used with what is known as satellites to create networks in your home that can be accessed from several points. The satellite captures the router signal and turns it on again and you can install as many satellites as you need in various locations in your home. The technology used produces a much better solution than using a direct extender range but is significantly more expensive.
So there you have four possible ways where you can set up a house with better wifi than you have today. Which one you choose tends to depend on your budget and maybe your level of trust in preparing technical aspects.